How can you tell if the stickers are correct on a rubik's cube?
Q. I think someone messed with my rubik's cube and moved some of the stickers around. Is there anyway to check and make sure they're correct? I haven't learned how to fully solve it yet, so that's not really and option. Thank you.
Asked by CC - Fri Dec 25 13:32:12 2009 - - 1 Answers - 0 Comments
A. You're stuffed. Pull all the stickers off and get all the sides the same colour and start again. It happened to me once Try to find a cube without stickers, just colours on the plastic if possible to stop that again. But then someone could just make a few moves without you knowing...;)
Answered by Cool Chick - Fri Dec 25 13:46:51 2009
Q. I think someone messed with my rubik's cube and moved some of the stickers around. Is there anyway to check and make sure they're correct? I haven't learned how to fully solve it yet, so that's not really and option. Thank you.
Asked by CC - Fri Dec 25 13:32:12 2009 - - 1 Answers - 0 Comments
A. You're stuffed. Pull all the stickers off and get all the sides the same colour and start again. It happened to me once Try to find a cube without stickers, just colours on the plastic if possible to stop that again. But then someone could just make a few moves without you knowing...;)
Answered by Cool Chick - Fri Dec 25 13:46:51 2009
What are all the different way's to solve a Rubik's cube?
Q. Hey I am obsessed with Rubik's Cubes, I'm 14 and absolutely love showing people Rubik's Cubes can be solved. So I would like a list of every method there is I already know the beginner's method. So much help would be much appreciated. AND God's Algorithm does exist I would strongly like to know it. So please I need a full list of method's for a 3x3x3 Rubik's Cube.
Asked by Cameron - Sat Feb 13 00:08:21 2010 - - 3 Answers - 0 Comments
Q. Hey I am obsessed with Rubik's Cubes, I'm 14 and absolutely love showing people Rubik's Cubes can be solved. So I would like a list of every method there is I already know the beginner's method. So much help would be much appreciated. AND God's Algorithm does exist I would strongly like to know it. So please I need a full list of method's for a 3x3x3 Rubik's Cube.
Asked by Cameron - Sat Feb 13 00:08:21 2010 - - 3 Answers - 0 Comments
How to flip the colors of the last cube of a 4x4 rubik cube?
Q. I have a 4x4 rubik cube with one corner that needs to be flipped around. The rest of the cube is complete. Can anyone help me with the algorithm.
Asked by Carrie O - Sat May 24 06:43:44 2008 - - 3 Answers - 0 Comments
A. watch...
Answered by zawq - Sat May 24 06:47:16 2008
Q. I have a 4x4 rubik cube with one corner that needs to be flipped around. The rest of the cube is complete. Can anyone help me with the algorithm.
Asked by Carrie O - Sat May 24 06:43:44 2008 - - 3 Answers - 0 Comments
A. watch...
Answered by zawq - Sat May 24 06:47:16 2008
What is an easy method for solving a Rubik Cube?
Q. I've seen so many people solve Rubik Cube's really quickly in a matter of seconds! What is a simple, easy to follow way of solving one?
Asked by OX - Sat Aug 29 11:28:08 2009 - - 4 Answers - 0 Comments
A. Go to youtube, and look up the channel called pogobat. His tutorial is the easiest, and the best by far. Once you get comfortable solving with his way, try the Fridrich method. Google Fridrich mothod and click on Jessica Fridrich's speed cubing page.
Answered by nomojofro - Sat Aug 29 21:20:26 2009
Q. I've seen so many people solve Rubik Cube's really quickly in a matter of seconds! What is a simple, easy to follow way of solving one?
Asked by OX - Sat Aug 29 11:28:08 2009 - - 4 Answers - 0 Comments
A. Go to youtube, and look up the channel called pogobat. His tutorial is the easiest, and the best by far. Once you get comfortable solving with his way, try the Fridrich method. Google Fridrich mothod and click on Jessica Fridrich's speed cubing page.
Answered by nomojofro - Sat Aug 29 21:20:26 2009
How can I use Group Theory to solve a Rubik's Cube without guessing?
Q. I thought that group theory was a way to solve a Rubik's cube, so I did my research and I have a good understanding of how it works. The problem is that I don't know how to apply these mathematics into solving the cube. Any help or links would be appreciated, Thank you.
Asked by John S - Sat Feb 28 23:26:33 2009 - - 1 Answers - 0 Comments
A. Well, unfortunately, truly "solving" a Rubik's cube in group theory amounts to finding a "reduced word" for the unsolved position of the Rubik's cube. This is in general an open problem (we don't even know how to find the length of the reduced word), so good luck on your goal. We can analyze certain things about the Rubik's cube using group theory, but I don't think a knowledge of group theory will help more than just making sequences of moves and noting all that the sequence does in the end.
Answered by Awms A - Sat Feb 28 23:48:28 2009
Q. I thought that group theory was a way to solve a Rubik's cube, so I did my research and I have a good understanding of how it works. The problem is that I don't know how to apply these mathematics into solving the cube. Any help or links would be appreciated, Thank you.
Asked by John S - Sat Feb 28 23:26:33 2009 - - 1 Answers - 0 Comments
A. Well, unfortunately, truly "solving" a Rubik's cube in group theory amounts to finding a "reduced word" for the unsolved position of the Rubik's cube. This is in general an open problem (we don't even know how to find the length of the reduced word), so good luck on your goal. We can analyze certain things about the Rubik's cube using group theory, but I don't think a knowledge of group theory will help more than just making sequences of moves and noting all that the sequence does in the end.
Answered by Awms A - Sat Feb 28 23:48:28 2009
Is there an easy way to make my Rubik's Cube turn easily again?
Q. I've used my Rubik's Cube for a while and it's starting to get harder and harder to turn. So i figured someone out there might know a good way. Preferably, I need an inexpensive, not real messy, and easy to apply way.
Asked by Superman - Thu Apr 1 15:28:47 2010 - - 4 Answers - 0 Comments
A. Buy a new one, El Cheapo.
Answered by MichaelMoore (yeah, that one) - Fri Apr 9 15:25:16 2010
Q. I've used my Rubik's Cube for a while and it's starting to get harder and harder to turn. So i figured someone out there might know a good way. Preferably, I need an inexpensive, not real messy, and easy to apply way.
Asked by Superman - Thu Apr 1 15:28:47 2010 - - 4 Answers - 0 Comments
A. Buy a new one, El Cheapo.
Answered by MichaelMoore (yeah, that one) - Fri Apr 9 15:25:16 2010
What is a good website to go to or book to buy where it can show me how to solve a Rubik's Cube?
Q. I have been searching the internet for a non-confusing solution or one that explains it thoroughly to solving a Rubik's Cube. Where can I go or what can I do that can help me solve it?
Asked by Elena E - Fri May 9 23:44:13 2008 - - 3 Answers - 0 Comments
A. Try to look at a solution on Youtube.
Answered by dxfan45 - Fri May 9 23:52:46 2008
Q. I have been searching the internet for a non-confusing solution or one that explains it thoroughly to solving a Rubik's Cube. Where can I go or what can I do that can help me solve it?
Asked by Elena E - Fri May 9 23:44:13 2008 - - 3 Answers - 0 Comments
A. Try to look at a solution on Youtube.
Answered by dxfan45 - Fri May 9 23:52:46 2008
How do you get that cross thing to solve a rubik's cube?
Q. I have spent hours trying to get the first step, the cross, to solve the rubik's cube. i still cant do it. are there any other methods to solve the cube other that the cross thing because i cant do that!! thanks!
Asked by amitpop22 - Sat Sep 15 17:55:54 2007 - - 3 Answers - 0 Comments
A. Really, if you knew about how to solve the cube, you would already know the person asking the question would have already looked at instructions. Really, creating a cross usually isn't common sense, so I'm assuming you read to do that from somewhere. A very nice page created by Dan Harris with animations to explain how to place the edges in a cross. Detailed description also created by Dan Harris, also helpful. Really, there are other methods to solving without using the cross, such as the "Petrus" Method or "Corner-first method" (if you want to find more of those, google) but I personally find that for a person just now learning how to solve a rubik's cube, they should learn with the cross. Happy cubing!
Answered by dv297 - Tue Sep 18 22:06:04 2007
Q. I have spent hours trying to get the first step, the cross, to solve the rubik's cube. i still cant do it. are there any other methods to solve the cube other that the cross thing because i cant do that!! thanks!
Asked by amitpop22 - Sat Sep 15 17:55:54 2007 - - 3 Answers - 0 Comments
A. Really, if you knew about how to solve the cube, you would already know the person asking the question would have already looked at instructions. Really, creating a cross usually isn't common sense, so I'm assuming you read to do that from somewhere. A very nice page created by Dan Harris with animations to explain how to place the edges in a cross. Detailed description also created by Dan Harris, also helpful. Really, there are other methods to solving without using the cross, such as the "Petrus" Method or "Corner-first method" (if you want to find more of those, google) but I personally find that for a person just now learning how to solve a rubik's cube, they should learn with the cross. Happy cubing!
Answered by dv297 - Tue Sep 18 22:06:04 2007
What is the best lubricate for a Rubik's/DIY Cube?
Q. Ok So I have a DIY Cube that was already lubricated but, I dropped it in water and alot of the lube came off. So my Question is, What is the best lubricate for a Rubik's/DIY Cube?
Asked by tabby - Fri Feb 8 15:54:30 2008 - - 3 Answers - 0 Comments
A. Silicon. It works the best, and it is very cheap and widely availabe. however, you must be very careful about it, else, you run the risk of killing your cube. I assume that you already know how to lubricate the cube. take it apart, put some lube on the parts of the cube that turn, though do not over-do it. Next, reassemble the cube in the right order, scramble it and solve it. If it feels fine and you can cut corners on it, then take it apart again without touching the insides of the cube. Leave it to dry. Once it does, put it back together and feel the difference.
Answered by NoOB123 - Mon Feb 11 01:50:54 2008
Q. Ok So I have a DIY Cube that was already lubricated but, I dropped it in water and alot of the lube came off. So my Question is, What is the best lubricate for a Rubik's/DIY Cube?
Asked by tabby - Fri Feb 8 15:54:30 2008 - - 3 Answers - 0 Comments
A. Silicon. It works the best, and it is very cheap and widely availabe. however, you must be very careful about it, else, you run the risk of killing your cube. I assume that you already know how to lubricate the cube. take it apart, put some lube on the parts of the cube that turn, though do not over-do it. Next, reassemble the cube in the right order, scramble it and solve it. If it feels fine and you can cut corners on it, then take it apart again without touching the insides of the cube. Leave it to dry. Once it does, put it back together and feel the difference.
Answered by NoOB123 - Mon Feb 11 01:50:54 2008
What are the differences between Rubik's Cube stickers?
Q. I am looking to buy a new set of stickers for my Rubik's Cube. On the Rubik's website, they sell both printed polypropylene plastic stickers and PVC stickers. What are the differences between these two types? Is one better than the other? Also, how do the Cubesmith stickers compare to these ones?
Asked by creswelljames - Sat Oct 11 13:02:15 2008 - - 3 Answers - 0 Comments
A. There's not really a difference, but I would recommend buying CubeSmith stickers rather than the ones from the Rubik's site. But if you really want colors that will last, you should buy tiles, one CubeSmith, they have smooth or textured tiles. The tiles just stick right onto your cube and can stay there for a looong time. Last way longer than stickers. If the tiles loose the stick on the back, you can glue them on. The tiles work really well, smooth tiles are just smooth surface while textured have like grits and textures on the surface.
Answered by Cheesus - Sun Oct 12 20:22:23 2008
Q. I am looking to buy a new set of stickers for my Rubik's Cube. On the Rubik's website, they sell both printed polypropylene plastic stickers and PVC stickers. What are the differences between these two types? Is one better than the other? Also, how do the Cubesmith stickers compare to these ones?
Asked by creswelljames - Sat Oct 11 13:02:15 2008 - - 3 Answers - 0 Comments
A. There's not really a difference, but I would recommend buying CubeSmith stickers rather than the ones from the Rubik's site. But if you really want colors that will last, you should buy tiles, one CubeSmith, they have smooth or textured tiles. The tiles just stick right onto your cube and can stay there for a looong time. Last way longer than stickers. If the tiles loose the stick on the back, you can glue them on. The tiles work really well, smooth tiles are just smooth surface while textured have like grits and textures on the surface.
Answered by Cheesus - Sun Oct 12 20:22:23 2008
What should I use to cut the plastic on a Rubik's cube?
Q. What should I use to cut a Rubik's cube up with? I am trying to make a custom puzzle and it requires cutting of the cube.
Asked by seanwatts111893 - Sat Aug 23 22:36:41 2008 - - 5 Answers - 0 Comments
A. It really depends on how precise you are making them. If you just use a dremel tool you can make cuts that are accurate enough. You should use casting resin to cast copies of the pieces you want to, and you can sand down the pieces to make it so there are less imperfections. I am assuming you aren't making anything complicated, so this will work.
Answered by Michael - Sun Aug 24 23:36:31 2008
Q. What should I use to cut a Rubik's cube up with? I am trying to make a custom puzzle and it requires cutting of the cube.
Asked by seanwatts111893 - Sat Aug 23 22:36:41 2008 - - 5 Answers - 0 Comments
A. It really depends on how precise you are making them. If you just use a dremel tool you can make cuts that are accurate enough. You should use casting resin to cast copies of the pieces you want to, and you can sand down the pieces to make it so there are less imperfections. I am assuming you aren't making anything complicated, so this will work.
Answered by Michael - Sun Aug 24 23:36:31 2008
What benefits do I get from playing Rubik's cube, does my memory get better?
Q. I have been asked what benefits or advantages i can get from playing rubik's cube, care to help?
Asked by Marvin L - Tue Jan 22 00:07:50 2008 - - 3 Answers - 0 Comments
A. Studies have shown that engaging in mental activity through games and puzzles can help keep the mind sharp in old age. Just as regular physical exercise helps the body, regular mental exercise has benefits for the mind. Completing puzzles and crosswords, and board games have been shown to be beneficial to the maintenance of short-term memory, eye-hand co-ordination and general concentration. In a five-year study involving more than 400 participants over 75 years of age, it was found that activities that involve thought, such as reading, writing and board games, were more likely to ward off dementia. Of the physical activities trialled, only dancing was of any use in keeping our minds fit.
Answered by aresh s - Thu Jan 24 04:30:28 2008
Q. I have been asked what benefits or advantages i can get from playing rubik's cube, care to help?
Asked by Marvin L - Tue Jan 22 00:07:50 2008 - - 3 Answers - 0 Comments
A. Studies have shown that engaging in mental activity through games and puzzles can help keep the mind sharp in old age. Just as regular physical exercise helps the body, regular mental exercise has benefits for the mind. Completing puzzles and crosswords, and board games have been shown to be beneficial to the maintenance of short-term memory, eye-hand co-ordination and general concentration. In a five-year study involving more than 400 participants over 75 years of age, it was found that activities that involve thought, such as reading, writing and board games, were more likely to ward off dementia. Of the physical activities trialled, only dancing was of any use in keeping our minds fit.
Answered by aresh s - Thu Jan 24 04:30:28 2008
What are the "Rubik's cubes" that can be twisted diagonally?
Q. I saw what looked like a Rubik's cube on Youtube except it could twisted diagonally along all sides and now I can't find it on Youtube. I wanted to know what these are called and where I could get them.
Asked by Blake S - Sat Apr 19 22:09:17 2008 - - 2 Answers - 0 Comments
A. Megaminx - dodecahedron-shaped puzzle Pyraminx - tetrahedron-shaped puzzle Try to visit the link below.
Answered by Yves Mozart - Sun Apr 20 04:02:01 2008
Q. I saw what looked like a Rubik's cube on Youtube except it could twisted diagonally along all sides and now I can't find it on Youtube. I wanted to know what these are called and where I could get them.
Asked by Blake S - Sat Apr 19 22:09:17 2008 - - 2 Answers - 0 Comments
A. Megaminx - dodecahedron-shaped puzzle Pyraminx - tetrahedron-shaped puzzle Try to visit the link below.
Answered by Yves Mozart - Sun Apr 20 04:02:01 2008
How do you solve a Rubik's Cube in 20 seconds?
Q. I know how to solve a Rubik's cube, but it takes me like a minute and a half. I know there are ways to solve the cube in 20, 17, I even heard 10 seconds. How do you do that? Please provide links if possible.
Asked by Yoda Cookie Monster - Sun Apr 25 13:40:42 2010 - - 5 Answers - 0 Comments
A. There are a couple of really good speedcubing methods out there. Bascially you have two possible scenarios: memorize few sequences (but take longer amounts of time) or memorize hundreds of turn sequences (and get very fast times). The two most popular speedcubing methods I've seen are the Lars Petrus ( and the Jessica Fridrich method ( Both are for advanced cube solvers, so don't even try them if you are just beginning. One of the most complex parts about those methods, if you really want to get good, is that you need to throw away your favorite color. Most cube solvers start with a particular color, and work from there, regardless of what method you use to solve it. However, it is possible that starting with a different color… [cont.]
Answered by friendlyhelp04 - Tue Apr 27 15:30:55 2010
Q. I know how to solve a Rubik's cube, but it takes me like a minute and a half. I know there are ways to solve the cube in 20, 17, I even heard 10 seconds. How do you do that? Please provide links if possible.
Asked by Yoda Cookie Monster - Sun Apr 25 13:40:42 2010 - - 5 Answers - 0 Comments
A. There are a couple of really good speedcubing methods out there. Bascially you have two possible scenarios: memorize few sequences (but take longer amounts of time) or memorize hundreds of turn sequences (and get very fast times). The two most popular speedcubing methods I've seen are the Lars Petrus ( and the Jessica Fridrich method ( Both are for advanced cube solvers, so don't even try them if you are just beginning. One of the most complex parts about those methods, if you really want to get good, is that you need to throw away your favorite color. Most cube solvers start with a particular color, and work from there, regardless of what method you use to solve it. However, it is possible that starting with a different color… [cont.]
Answered by friendlyhelp04 - Tue Apr 27 15:30:55 2010
I want to solve the rubik's cube with different colors in the center. Is this possible?
Q. I tried solving it the way i normally do by simply solving the cube around different centers. However when I get the point of putting the last four cubes into place, I cannot get anymore than two of them right? Is it possible to solve the rubik's cuber with different colored centers?
Asked by Gatsby - Sun May 17 16:09:24 2009 - - 3 Answers - 1 Comments
A. With over 43 quintillion possible configurations and only one solution to Rubik's cube, you're doing pretty good. By the last four, you mean the corner pieces on the last layer, To put the corner pieces in the correct position regardless of orientation, find one piece that is in the correct position (if no pieces are in the correct position, do this algorithm anyway). Hold the cube so that the piece is in the up right front position, then do this algorithm: U R U' L' U R' U' L What this algorithm does is, it rotates the other three corner pieces one place counterclockwise without moving the one in the up right front position. Keep doing that until all four pieces are in the correct position, not necessarily oriented correctly. Then… [cont.]
Answered by Wile E. - Sun May 17 16:29:19 2009
Q. I tried solving it the way i normally do by simply solving the cube around different centers. However when I get the point of putting the last four cubes into place, I cannot get anymore than two of them right? Is it possible to solve the rubik's cuber with different colored centers?
Asked by Gatsby - Sun May 17 16:09:24 2009 - - 3 Answers - 1 Comments
A. With over 43 quintillion possible configurations and only one solution to Rubik's cube, you're doing pretty good. By the last four, you mean the corner pieces on the last layer, To put the corner pieces in the correct position regardless of orientation, find one piece that is in the correct position (if no pieces are in the correct position, do this algorithm anyway). Hold the cube so that the piece is in the up right front position, then do this algorithm: U R U' L' U R' U' L What this algorithm does is, it rotates the other three corner pieces one place counterclockwise without moving the one in the up right front position. Keep doing that until all four pieces are in the correct position, not necessarily oriented correctly. Then… [cont.]
Answered by Wile E. - Sun May 17 16:29:19 2009
what is the address of the company that makes the rubik's cube?
Q. im in the 9th grade and i have to write a friendly business letter to a company whose product i enjoy. i chose to write to the company that makes the rubik's cube. who do i write to--address? and wat is the person's name of whom i have to write to when writing about the rubik's cube.
Asked by eliza - Sun Sep 23 21:05:51 2007 - - 2 Answers - 0 Comments
A. Company Name:Yiwu Hongxing Printing Factory Contact Person: Mr. Bekily Chen Address:Room 202, 19 Bldg., International Village Park, Yiwu City, Zhejiang Province. China, City, China Zip:322000 Telephone:86-579-85522553 85671035 85671036 85282 Mobile Phone:13967408635 Fax:86-579-85671026 Website: www.cnhongxingys.cn
Answered by redunicorn - Sun Sep 23 21:19:15 2007
Q. im in the 9th grade and i have to write a friendly business letter to a company whose product i enjoy. i chose to write to the company that makes the rubik's cube. who do i write to--address? and wat is the person's name of whom i have to write to when writing about the rubik's cube.
Asked by eliza - Sun Sep 23 21:05:51 2007 - - 2 Answers - 0 Comments
A. Company Name:Yiwu Hongxing Printing Factory Contact Person: Mr. Bekily Chen Address:Room 202, 19 Bldg., International Village Park, Yiwu City, Zhejiang Province. China, City, China Zip:322000 Telephone:86-579-85522553 85671035 85671036 85282 Mobile Phone:13967408635 Fax:86-579-85671026 Website: www.cnhongxingys.cn
Answered by redunicorn - Sun Sep 23 21:19:15 2007
where is the best site for solving a rubik's cube from the first layer?
Q. A few weeks ago, my boyfriend gave me a rubik's cube and I really would love to solve it. So far, I've solved the first layer. Does anyone know a site with pictures and good instructions to help me out?
Asked by einsteinempress9 - Mon Feb 11 01:06:17 2008 - - 2 Answers - 0 Comments
A. The best tutorial so far for the easiest method is written by Alan Chang. It describes in seven clear steps how to solve the Rubik's cube. The link is provided below in the references. Other methods include the Petrus method, which is the one that I use, and the Fredrich method, which is simple in theory but shouldn't be touched except by those who want to spend a lot of time to learn to speed cube. Hoped that helped, [
Answered by NoOB123 - Mon Feb 11 01:35:44 2008
Q. A few weeks ago, my boyfriend gave me a rubik's cube and I really would love to solve it. So far, I've solved the first layer. Does anyone know a site with pictures and good instructions to help me out?
Asked by einsteinempress9 - Mon Feb 11 01:06:17 2008 - - 2 Answers - 0 Comments
A. The best tutorial so far for the easiest method is written by Alan Chang. It describes in seven clear steps how to solve the Rubik's cube. The link is provided below in the references. Other methods include the Petrus method, which is the one that I use, and the Fredrich method, which is simple in theory but shouldn't be touched except by those who want to spend a lot of time to learn to speed cube. Hoped that helped, [
Answered by NoOB123 - Mon Feb 11 01:35:44 2008
What is an efficient substance to make a Rubik's Cube less stiff?
Q. I can solve the Rubik's Cube on average in 1 Min. and 19 Seconds (Not that impressive)(But for recreational uses it is). I am trying to make it so it will be less stiff. So i was wondering what i should use to make it turn more freely. Ill be open to anything. Just nothing that will waste my time.
Asked by zombie_slayer555 - Tue May 6 18:06:25 2008 - - 5 Answers - 0 Comments
A. Do not use WD40. It melts some cubes, rendering them useless. Silicone spray is the typical lube of choice. For the best info on cubes over all, read up here: One link from that source is this speed solving forum where you can find many, many tips on physical improvements to the cube as well as tips on methodology improvements: Good Luck!
Answered by VinceHerman - Tue May 6 19:11:50 2008
Q. I can solve the Rubik's Cube on average in 1 Min. and 19 Seconds (Not that impressive)(But for recreational uses it is). I am trying to make it so it will be less stiff. So i was wondering what i should use to make it turn more freely. Ill be open to anything. Just nothing that will waste my time.
Asked by zombie_slayer555 - Tue May 6 18:06:25 2008 - - 5 Answers - 0 Comments
A. Do not use WD40. It melts some cubes, rendering them useless. Silicone spray is the typical lube of choice. For the best info on cubes over all, read up here: One link from that source is this speed solving forum where you can find many, many tips on physical improvements to the cube as well as tips on methodology improvements: Good Luck!
Answered by VinceHerman - Tue May 6 19:11:50 2008
Is there only one configuration for a solved rubik's cube?
Q. Basically what I want to know is if you can write a message on a rubik's cube, scramble it, and give it to someone to solve. Is there only one final configuration, or are there many?
Asked by Hanna - Wed Jun 16 11:10:57 2010 - - 1 Answers - 0 Comments
A. Despite appearances, there is more than one solved combination IF there are markings on the center squares. During traditional solving methods, these six center squares get rotated a lot, but we don't notice because they're just solid colored squares. However, as soon as something is written on them, it gets jumbled and flipped around during solving, so by the end of a regular solve most or all of the center squares will be misaligned with the rest of the squares. An experienced cuber can correct one or two at a time (at the expense of some of the others' orientations), but it takes a true expert to get all six centers realigned at the same time. If you just write your message on the corner and edge cubies, though, it is certain to be… [cont.]
Answered by Chris - Wed Jun 16 11:41:29 2010
Q. Basically what I want to know is if you can write a message on a rubik's cube, scramble it, and give it to someone to solve. Is there only one final configuration, or are there many?
Asked by Hanna - Wed Jun 16 11:10:57 2010 - - 1 Answers - 0 Comments
A. Despite appearances, there is more than one solved combination IF there are markings on the center squares. During traditional solving methods, these six center squares get rotated a lot, but we don't notice because they're just solid colored squares. However, as soon as something is written on them, it gets jumbled and flipped around during solving, so by the end of a regular solve most or all of the center squares will be misaligned with the rest of the squares. An experienced cuber can correct one or two at a time (at the expense of some of the others' orientations), but it takes a true expert to get all six centers realigned at the same time. If you just write your message on the corner and edge cubies, though, it is certain to be… [cont.]
Answered by Chris - Wed Jun 16 11:41:29 2010
How to put the centre piece cubie of an Official Rubik's Cube on?
Q. Today I accidentally dropped my official Rubik's Cube brand cube and it basically exploded :( Everything else is fine except one centre piece cubie which fell off. Can I just superglue it back to the black turny thing or is it broken forever?
Asked by Lucatron - Fri Jul 9 04:36:33 2010 - - 1 Answers - 0 Comments
A. most of the time you can just stick it back on i wouldn't suggest superglue. if you do use super glue be very careful where you put it, you might just get you cube stuck...personal experience lol. most of the time you can fold a piece of paper and stick in there and put the piece over it. that usually does it for me
Answered by Cube_Ninja - Sat Jul 10 01:49:35 2010
Q. Today I accidentally dropped my official Rubik's Cube brand cube and it basically exploded :( Everything else is fine except one centre piece cubie which fell off. Can I just superglue it back to the black turny thing or is it broken forever?
Asked by Lucatron - Fri Jul 9 04:36:33 2010 - - 1 Answers - 0 Comments
A. most of the time you can just stick it back on i wouldn't suggest superglue. if you do use super glue be very careful where you put it, you might just get you cube stuck...personal experience lol. most of the time you can fold a piece of paper and stick in there and put the piece over it. that usually does it for me
Answered by Cube_Ninja - Sat Jul 10 01:49:35 2010
From Yahoo Answer Search: 'rubik'
Sat Jul 31 23:53:14 2010 [ refresh local cache ]
[Hide]▼
nwitimes.com
Tue, 13 Jul 2010 05:08:38 GMT+00:00
nwitimes.com Inventor Erno Rubik ( Rubik's Cube) is 66. Actor-comedian Cheech Marin is 64. Actress Didi Conn is 59. Country singer Louise Mandrell is 56. ...
pilarjerico.com
400px x 400px | 21.90kB
[source page]
Alguna vez ha jugado al cubo de Rubik Y lo mas complicado completo alguna vez una cara o dos Y el cubo entero En el caso afirmativo supongo que tardaria algo mas de lo que
how-to-easily.info
unknown
Mon, 19 Jul 2010 07:00:00 GM
25 Responses to How To Solve A . Rubik's. Cube Easily . EmbraceTheSilence27: July 19, 2010 at 7:21 am. I can fix everything until i have the last 4 corners on the blue side left.. then I do everything you say, but it only gets messed up ...
[Hide]▲
